PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY

Given that hexagonal boron nitride (hBN) particles are extremely stable in colloidal suspensions due to their low density, they are difficult to deposit via electrophoretic deposition (EPD). Poly (diallyldimethylammonium chloride) (PDDA) is widely used as a polyelectrolyte for ceramic particles because of its strong electrophoretic response. Nevertheless, studies on PDDA as a functionalising agent of hBN particles for EPD remain elusive. Here, hBN particles were functionalised with different amounts of PDDA to investigate effects on suspension stability and EPD yield. Deionised (DI)-water-based hBN particle suspensions with PDDA contents that varied from 0.3 wt% and 0.6 wt% (of hBN basis) were prepared using washed as-received hBN particles. Then, washed and nonwashed PDDA-functionalised hBN particle groups were prepared by subjecting only the former to water washing. Washing, which involved the repeated particle dispersion in DI water and vacuum filtration, successfully reduced the conductivity of the aqueous hBN suspension to 2 µS/cm, which was significantly lower than the conductivities of 180 and 25 µS/cm shown by the as-received particle suspension and PDDA-functionalised particles before washing. This result indicated that washing eliminated the interference of free ions on the suspension stability of hBN particles and EPD yield. In contrast to that of the nonwashed group, the suspension stability of the washed group decreased as the PDDA content was increased. Nevertheless, at 0.3 wt% and 0.6 wt% PDDA, the EPD yields of the washed group were 183% to 31% higher than those of the nonwashed group. This study provided new insight into the EPD of hBN particles using low-cost aqueous suspensions with sustainable ultralow ion conductivity.

• Bandara, Y. W., Gamage, P., & Gunarathne, D. S. (2020). Hot water washing of rice husk for ash removal: The effect of washing temperature, washing time and particle size. Renewable Energy, 153, 646-652. https://doi.org/10.1016/j.renene.2020.02.038

• Cao, L., Emami, S., & Lafdi, K. (2014). Large-scale exfoliation of hexagonal boron nitride nanosheets in liquid phase. Materials Express, 4(2), 165-171. https://doi.org/10.1166/mex.2014.1155

• Cui, M., Njoku, D. I., Li, B., Yang, L., Wang, Z., Hou, B., & Li, Y. (2021). Corrosion protection of aluminium alloy 2024 through an epoxy coating embedded with smart microcapsules: The responses of smart microcapsules to corrosive entities. Corrosion Communications, 1, 1-9. https://doi.org/10.1016/j.corcom.2021.06.001

• Du, X., Zhang, H., Yuan, Y., & Wang, Z. (2020). Semi-interpenetrating network anion exchange membranes based on quaternized polyvinyl alcohol/poly (diallyldimethylammonium chloride). Green Energy & Environment, 6(5), 743-750. https://doi.org/10.1016/j.gee.2020.06.015

• Ertuğ, B. (2013). Powder preparation, properties and industrial applications of hexagonal boron nitride. In Sintering Applications (pp. 33-54). IntechOpen. https://doi.org/10.5772/53325

• Gautam, P., Bajagain, R., & Jeong, S. W. (2020). Combined effects of soil particle size with washing time and soil-to-water ratio on removal of total petroleum hydrocarbon from fuel contaminated soil. Chemosphere, 250, Article 126206. https://doi.org/10.1016/j.chemosphere.2020.126206

• Hafeez, A., Karim, Z. A., Ismail, A. F., Samavati, A., Said, K. A. M., & Selambakkannu, S. (2020). Functionalized boron nitride composite ultrafiltration membrane for dye removal from aqueous solution. Journal of Membrane Science, 612, Article 118473. https://doi.org/10.1016/j.memsci.2020.118473

• Ihsanullah, I. (2020). Boron nitride-based materials for water purification: Progress and outlook. Chemosphere, 263, Article 127970. https://doi.org/10.1016/j.chemosphere.2020.127970

• Katagiri, K., Uemura, K., Uesugi, R., Inumaru, K., Seki, T., & Takeoka, Y. (2018). Structurally colored coating films with tunable iridescence fabricated via cathodic electrophoretic deposition of silica particles. RSC Advances, 8(20), 10776-10784. https://doi.org/10.1039/c8ra01215f

• Khalaj, M., Golkhatmi, S. Z., Alem, S. A. A., Baghchesaraee, K., Azar, M. H., & Angizi, S. (2020). Recent progress in the study of thermal properties and tribological behaviors of hexagonal boron nitride-reinforced composites. Journal of Composites Science, 4(3), Article 116. https://doi.org/10.3390/jcs4030116

• Kinzl, M., Reichmann, K., & Andrejs, L. (2009). Electrophoretic deposition of silver from organic PDADMAC-stabilized suspensions. Journal of Materials Science, 44(14), 3758-3763. http://dx.doi.org/10.1007/s10853-009-3504-x

• Lalau, C. C., & Low, C. T. J. (2019). Electrophoretic deposition for lithium‐ion battery electrode manufacture. Batteries & Supercaps, 2(6), 551-559. https://doi.org/10.1021/acsami.7b10683.s001

• Lau, K. T., & Narayanasamy, J. (2018). Semiconductor component and method for producing a semiconductor component. US Patent, US 10,121,723 B1.

• Lau, K. T., & Sorrell, C. C. (2011). Electrophoretic mobilities of dissolved polyelectrolyte charging agent and suspended non-colloidal titanium during electrophoretic deposition. Materials Science and Engineering: B, 176(5), 369-381. https://doi.org/10.1016/j.mseb.2010.10.012

• Lau, K. T., & Sorrell, C. C. (2013). Effect of charging agents on electrophoretic deposition of titanium particles. Journal of The Australian Ceramic Society, 49(2), 104-112.

• Lewis, J. A. (2000). Colloidal processing of ceramics. Journal of the American Ceramic Society, 83(10), 2341-2359.

• Li, J., Hao, L., Zheng, F., Chen, X., Wang, S., & Fan, Y. (2020). Erosion corrosion behavior of aluminum electrode in simulated HVDC water cooling at 50°C. International Journal of Electrochemical Science, 15, 5320-5332. https://doi.org/10.1002/maco.202112453

• Lin, Z F., Wang, Y., Zhang, D., & Li, X. B. (2016). Corrosion resistance research of ZnO/polyelectrolyte composite film. International Journal of Electrochemical Science, 11, 8512-8519. https://doi.org/10.20964/2016.10.37

• Moreno, R. (2020). Better ceramics through colloid chemistry. Journal of the European Ceramic Society, 40(3), 559-587. https://doi.org/10.1016/j.jeurceramsoc.2019.10.014

• Muto, H., Yokoi, A., & Tan, W. K. (2020). Electrostatic assembly technique for novel composites fabrication. Journal of Composites Science, 4(4), Article 155. https://doi.org/10.3390/jcs4040155

• Narayanasamy, J., Lau, K. T., & Zaimi, M. (2016). Transistor package’s boron nitride film microstructure and roughness: Effect of EPD suspensions’ pH and binder. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 8(2), 99-104.

• Nasser, J., Steinke, K., Zhang, L., & Sodano, H. (2020). Enhanced interfacial strength of hierarchical fiberglass composites through an aramid nanofiber interphase. Composites Science and Technology, 192, Article 108109. https://doi.org/10.1016/j.compscitech.2020.108109

• Sanchez, J. S., Xu, J., Xia, Z., Sun, J., Asp, L. E., & Palermo, V. (2021). Electrophoretic coating of LiFePO4/graphene oxide on carbon fibers as cathode electrodes for structural lithium ion batteries. Composites Science and Technology, 208, Article 108768. https://doi.org/10.1016/j.compscitech.2021.108768

• Tiwari, P., Ferson, N. D., & Andrew, J. S. (2020). Elucidating the role of electrophoretic mobility for increasing yield in the electrophoretic deposition of nanomaterials. Journal of Colloid and Interface Science, 570, 109-115. https://doi.org/10.1016/j.jcis.2020.02.103

• Turhan, H., & Bicak, N. (2020). Selective dinitramide removal from aqueous solution by crosslinked polyDADMAC gels. Propellants, Explosives, Pyrotechnics, 45(6), 981-987. https://doi.org/10.1002/prep.201900271

• Yu, K., Yuan, T., Zhang, S., & Bao, C. (2021). Hypergravity-induced accumulation: A new, efficient, and simple strategy to improve the thermal conductivity of boron nitride filled polymer composites. Polymers, 13(3), Article 459. https://doi.org/10.3390/polym13030459

• Zarbov, M., Schuster, I., & Gal-Or, L. (2004). Methodology for selection of charging agents for electrophoretic deposition of ceramic particles. Journal of Materials Science, 39(3), 813-817.

• Zhou, H., Zhu, J., Liu, Z., Yan, Z., Fan, X., Lin, J., Wang, G., Yan, Q., Yu, T., Ajayan, P. M., & Tour, J. M. (2014). High thermal conductivity of suspended few-layer hexagonal boron nitride sheets. Nano Research, 7(8), 1232-1240. https://doi.org/10.1007/s12274-014-0486-z