PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY

The price of coal used by a pineapple processing plant has increased from 3.90 Php/kg in 2018 to 8.60 Php/kg in 2022, thus increasing steam generation costs. This study conducted an energy audit on the two 22-TPH coal-fired boilers of the pineapple processing plant to determine boiler efficiency, quantify sources of heat loss, identify energy conservation measures, and calculate energy and coal savings. The coal-fired boilers investigated were fluidized bed combustion boilers with a reverse osmosis feedwater system. The boiler efficiency was calculated using an indirect method, considering energy losses from sensible heat in refuse and blowdown water. Of the three performance tests conducted, the average boiler efficiency is at 80.655%. The top five sources of heat loss were dry flue gas, hydrogen in coal, moisture in coal, surface radiation and convection, and boiler blowdown. These sources account for 18.322% of the energy input. The identified energy conservation measures include the installation of an automatic oxygen trim control, the installation of an economizer, the installation of a caustic injection system, and the insulation of uninsulated surfaces. These measures have a total potential energy savings of 52,494,974 MJ/yr and coal savings of 2,594,579 kg/yr. While a caustic injection system is not yet installed, setting blowdown TDS to 2,090 ppm can reduce energy consumption by 1,656,496 MJ/yr and coal consumption by 81,873 kg/yr. Using coal with lower hydrogen and moisture content can also reduce energy loss by 6,096,810 MJ/yr per 0.5% reduction in hydrogen content and 6,816,813 MJ/yr per 5% reduction in moisture content.

• Advanced Manufacturing Office. (2012). Use Feedwater Economizers for Waste Heat Recovery. U.S. Department of Energy. https://www.energy.gov/sites/prod/files/2014/05/f16/steam3_recovery.pdf

• Agrawal, T., & Dubey, S. K. (2016). Fluidized Bed Combustion (FBC) in coal based thermal power plants. International Journal of Advance Research in Science and Engineering, 5(3), 299-308.

• Arromdee, P., & Kuprianov, V. I. (2021). Experimental study and empirical modeling of CO and NO behaviors in a fluidized-bed combustor firing pelletized biomass fuels. Biomass Conversion and Biorefinery, 11(5), 1507-1520. https://doi.org/10.1007/s13399-019-00542-x

• Bora, M. K., & Nakkeeran, S. (2014). Performance analysis from the efficiency estimation of coal fired boiler. International Journal of Advanced Research, 2(5), 561-574.

• Campli, S., Acharya, M., Channapattana, S. V., Pawar, A. A., Gawali, S. V., & Hole, J. (2021). The effect of nickel oxide nano‐additives in Azadirachta indica biodiesel‐diesel blend on engine performance and emission characteristics by varying compression ratio. Environmental Progress & Sustainable Energy, 40(2), Article e13514. https://doi.org/10.1002/ep.13514

• Channapattana, S. V., Campli, S., Madhusudhan, A., Notla, S., Arkerimath, R., & Tripathi, M. K. (2023). Energy analysis of DI-CI engine with nickel oxide nanoparticle added azadirachta indica biofuel at different static injection timing based on exergy. Energy, 267, Article 126622. https://doi.org/10.1016/j.energy.2023.126622

• Dalgleish, A. Z., & Grobler, L. J. (2008). Energy conservation opportunities at a pineapple processing facility. Energy Engineering, 105(1), 6-23. https://doi.org/10.1080/01998590809509363

• Gupta, R. D., Ghai, S., & Jain, A. (2011). Energy efficiency improvement strategies for industrial boilers: a case study. Journal of Engineering and Technology, 1(1), 52-56.

• Harrell, G. (2004). Boiler blowdown energy recovery. Energy Engineering, 101(5), 32-42. https://doi.org/10.1080/01998590409509277

• Joshi, P. M., Shinde, S., & Chaudhary, K. (2021). A case study on assessment performance and energy efficient recommendations for industrial boiler. International Journal of Research and Review, 8(4), 61-69. https://doi.org/10.52403/ijrr.20210410

• Kocabas, C., & Savas, A. F. (2021). Reducing energy losses of steam boilers caused by blowdown with using the FMEA method. Smart Science, 9(2), 70-79.

• Kumar, A., Sharma, S., & Gangacharyulu, D. (2018). Energy audit of coal fired thermal power plant. International Journal of Engineering Research & Technology, 7(7), 1-9.

• Namdev, A. K., Tiwari, A. C., Shukla, M. G. K., & India, B. J. (2016). Energy audit of a boiler and waste heat recovery system in thermal power plant. International Journal of Engineering Research and General Science, 4(6), 133-142.

• Peña, J. A. (2011, November 16-17). Bubbling fluidized bed. When to use this technology. In Industrial Fluidization South Africa, Southern African Institute of Mining and Metallurgy (pp. 57-66). Johannesburg, South Africa.

• Sahai, A., & Kumar, S. (2017). To calculate and improvement in the efficiency of FBC boiler. International Research Journal of Engineering and Technology, 4(9), 244-260.

• Shi, Y., Liu, Q., Shao, Y., & Zhong, W. (2020). Energy and exergy analysis of oxy-fuel combustion based on circulating fluidized bed power plant firing coal, lignite and biomass. Fuel, 269, Article 117424. https://doi.org/10.1016/j.fuel.2020.117424

• Srinidhi, C., Madhusudhan, A., & Channapattana, S. V. (2019). Effect of NiO nanoparticles on performance and emission characteristics at various injection timings using biodiesel-diesel blends. Fuel, 235, 185-193. https://doi.org/10.1016/j.fuel.2018.07.067

• The American Society of Mechanical Engineers. (1965). Steam Generating Units Power Test Codes (ASME PTC 4.1). The American Society of Mechanical Engineers

• The American Society of Mechanical Engineers. (2009). Fired Steam Generators Performance Test Codes (ASME PTC 4-2008). The American Society of Mechanical Engineers

• UNIDO. (2016). Manual for Industrial Steam Systems Assessment and Optimization. United Nations Industrial Development Organization. https://www.unido.org/sites/default/files/2017-11/SSO-Manual-Print-FINAL-20161109-One-Page-V2.pdf