PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY

This review aims to study the process plant damage mechanisms published by previous research, such as general corrosion, localised corrosion, and stress corrosion cracking. This review was conducted by analysing the current application of the common inspection method and technique and focusing on the phased array ultrasonic testing application. In order to further the current study, the review seeks direction on evaluating phased array corrosion mapping techniques to detect corrosion and metal loss during plant operation and minimise the plant’s need for maintenance. This systematic literature review provides a better understanding of the current damage mechanisms and shows the possibility of an extended future study.

• Aliprandi, P., Guglielmino, E., & Sili, A. (2020). Mechanical characterisation of the ASTM A335 P5 steel and reliability of radiant tubes after long operating time in a petrochemical industry furnace. Metallurgia Italiana, 112(10), 45-53.

• Almazrouee, A. I., Al-Fadhalah, K. J., Alhajeri, S. N., & Alfehaid, S. (2018). High temperature corrosion of martensitic steel of reheater pipes in a desalination power plant. Engineering Failure Analysis, 85, 89-96. https://doi.org/10.1016/j.engfailanal.2017.12.003

• Ameh, E. S., Ikpeseni, S. C., & Lawal, L. S. (2018). A review of field corrosion control and monitoring techniques of the upstream oil and gas pipelines. Nigerian Journal of Technological Development, 14(2), 67-73. https://doi.org/10.4314/njtd.v14i2.5

• API. (2011). API recommended practice 571: Damage mechanisms affecting fixed equipment in the refining industry. American Petroleum Institute. https://www.apiwebstore.org/standards/571?__hstc=23321061.45041909c1713c2f47776c88c555a58e.1717118461018.1717118461018.1717118461018.1&__hssc=23321061.1.1717118461019&__hsfp=1989271524

• Baby, N. V., Paricha, B., & Naik, S. J. (2016). Determination of corrosion rates and remaining life of piping using API and ASME standards in oil and gas industries. International Research Journal of Engineering and Technology, 3(6), 772-777.

• Ber, L. L., Benoist, G., & Dainelli, P. (2016). Corrosion detection and measurement improvement using advanced ultrasonic tools. 19th World Conference on Non-Destructive Testing, 554, 1-8.

• Bergman, R., Mauro, A. S., & Brian, M. (2018). Advanced volumetric phased array inspection for un-bored steam turbine rotors. In 27th ASNT Research Symposium (pp. 27-30). The American Society for Nondestructive Testing. https://doi.org/10.32548/rs.2018.002

• Caulder, A. (2018). Full matrix capture and total focusing method: The next evolution in ultrasonic testing. Materials Evaluation, 76(5), 591-597.

• Cheong, Y. M., Kim, K. M., & Kim, D. J. (2017). High-temperature ultrasonic thickness monitoring for pipe thinning in a flow-accelerated corrosion proof test facility. Nuclear Engineering and Technology, 49(7), 1463-1471. https://doi.org/10.1016/j.net.2017.05.002

• Cheshideh, H., Nasirpouri, F., Mardangahi, B., & Jabbarpour, A. (2021). Failure analysis and preventive recommendations against corrosion of steel tubes of gas risers in natural gas urban distribution lines. Engineering Failure Analysis, 122, Article 105240. https://doi.org/10.1016/j.engfailanal.2021.105240

• Chidambaram, S., Ashok, K., Karthik, V., & Venkatakrishnan, P. G. (2018). Microbiological corrosion of ASTM SA105 carbon steel pipe for industrial fire water usage. IOP Conference Series: Materials Science and Engineering, 314, Article 012027. https://doi.org/10.1088/1757-899X/314/1/012027

• Colombo, A., Oldani, L., & Trasatti, S. P. (2018). Corrosion failure analysis of galvanised steel pipes in a closed water cooling system. Engineering Failure Analysis, 84, 46-58. https://doi.org/10.1016/j.engfailanal.2017.10.008

• Cui, C., Ma, R., & Martínez-Pañeda, E. (2021). A phase field formulation for dissolution-driven stress corrosion cracking. Journal of the Mechanics and Physics of Solids, 147, Article 104254. https://doi.org/10.1016/j.jmps.2020.104254

• De Almeida, P. D., & Pereira, G. R. (2019). Phased array inspection of glass fiber reinforced polymers pipeline joints. Journal of Materials Research and Technology, 8(5), 4736-4740. https://doi.org/10.1016/j.jmrt.2019.08.020

• Du, L., Wang, Q., Li, X., & Yan, H. (2020). Cause analysis and suggestion on corrosion leakage of pipe in atmospheric and vacuum pressure unit. IOP Conference Series: Materials Science and Engineering, 711, Article 012015. https://doi.org/10.1088/1757-899X/711/1/012015

• Fajobi, M. A., Loto, R. T., & Oluwole, O. O. (2019). “Crude distillation overhead system”: Corrosion and control. Journal of Physics: Conference Series, 1378, Article 042090. https://doi.org/10.1088/1742-6596/1378/4/042090

• Fetzer, B. (2021). Phased array beam steering techniques used for composite inspection. The American Society for Nondestructive Testing.

• Fousianis, P., Anastasopoulos, A., Bouchagier, L., Kastanis, P., Papasalouros, D., Ladis, I., & Kourousis, D. (2018, October 22-23). Ultrasonic detection of hydrogen induced cracking (HIC) in oil and gas industry [Conference session]. 1st International Conference on Welding & NDT, of HSNT and WGI, Athens, Greece.

• Galán-Pinilla, C. A., Quintero-Ortiz, L. A., & Herrera-Ortiz, J. O. (2021). Dimensional characterisation with phased array ultrasonic testing of induced discontinuities in ASTM A36 steel by EDM and SMAW welding processes. UIS Engineering Magazine, 20(3), 147-154. https://doi.org/10.18273/revuin.v20n3-2021010

• Groysman, A. (2017). Corrosion problems and solutions in oil, gas, refining and petrochemical industry. Corrosion and Material Protection Journal, 61(3), 100-117. https://doi.org/10.1515/kom-2017-0013

• Gunasekar, S., & Sastikumar, D. (2020). Comparison of side drilled holes and surface notch response for phased array sectorial beams calibration process. Journal of Non Destructive Testing and Evaluation (JNDE), 19(2), 22-27.

• Holloway, P., & Ginzel, R. (2020). Ultrasonic phased array approach to detection and measurement of corrosion at pipe supports. e-Journal of Nondestructive Testing, 25(3), 1-10.

• Mazumder, M. A. J. (2020). Global impact of corrosion: occurrence, cost and mitigation. Global Journal of Engineering Sciences, 5(4), 1-5. https://doi.org/10.33552/gjes.2020.05.000618

• Jamil, J., & Yahya, S. Y. S. (2019). Corrosion assessment using advanced ultrasonic measurement technique. IOP Conference Series: Materials Science and Engineering, 554, Article 012004. https://doi.org/10.1088/1757-899X/554/1/012004

• Jordan, P., & Maharaj, C. (2020). Asset management strategy for HAZ cracking caused by sigma-phase and creep embrittlement in 304H stainless steel piping. Engineering Failure Analysis, 110, Article 104452. https://doi.org/10.1016/j.engfailanal.2020.104452

• Jory, C. (2019). Tips for internal corrosion using the echo to echo technique with compression. The NDT Technician, 18(3), 8-11.

• Kansara, D. P., Sorathiya, A. P., & Patel, H. R. (2018). Corrosion monitoring and detection techniques in petrochemical refineries. IOSR Journal of Electrical and Electronics Engineering (IOSR-JEEE), 13(2), 85-93.

• Khan, R., Ya, H. H., Pao, W., & Khan, A. (2019). Erosion–corrosion of 30◦, 60◦, and 90◦ carbon steel elbows in a multiphase flow containing sand particles. Materials, 12(23), Article 3898. https://doi.org/10.3390/ma12233898

• Khouzani, M. K., Bahrami, A., Hosseini-Abari, A., Khandouzi, M., & Taheri, P. (2019). Microbiologically influenced corrosion of a pipeline in a petrochemical plant. Metals, 9(4), Article 459. https://doi.org/10.3390/met9040459

• Kim, Y. L., Cho, S., & Park, I. K. (2021). Analysis of flaw detection sensitivity of phased array ultrasonics in austenitic steel welds according to inspection conditions. Sensors, 21(1), Article 242. https://doi.org/10.3390/s21010242

• Liu, S. W., Lv, J. H., & Wang, W. Z. (2018). Failure cases analysis in petrochemical industry. International Journal of Civil and Environmental Engineering, 11(5), 1-5. https://doi.org/10.5281/zenodo.1316600

• Liu, X. Y., Su, J. L., Zhang, L., & Su, X. Y. (2021). Power plant small-diameter tube phased array inspection verification and inspection technology. Journal of Physics: Conference Series, 2005, Article 012198. https://doi.org/10.1088/1742-6596/2005/1/012198

• Lozev, M., Neau, G. A., Yu, L., Eason, T. J., Orwig, S. E., Collins, R. C., Mammen, P. K., Reverdy, F., Lonne, S., Wassink, C., Cence, H., & Chew, J. (2020). Assessment of high temperature hydrogen attack using advanced ultrasonic array techniques. Materials Evaluation, 78(11), 1223-1238. http://dx.doi.org/10.32548/2020.me-04183

• Martins, C. M. B., Moreira, J. L., & Martins, J. I. (2014). Corrosion in water supply pipe stainless steel 304 and a supply line of helium in stainless steel 316. Engineering Failure Analysis, 39, 65-71. https://doi.org/10.1016/j.engfailanal.2014.01.017

• Mirchev, Y., Mihovski, M., & Chukachev, P. (2021). Ultrasonic testing of rough surfaces using phased array probe. Engineering Sciences, LVIII (1), 64-79. https://doi.org/10.7546/engsci.lviii.21.01.05

• Mohan, B. C., & Jeyasekhar, M. C. (2019). Oil and gas assets condition monitoring by high sensitive paut hydroform corrosion monitoring technique for integrity assessment.

• Njelle, V., Ikeh, O. Cornelius, O., & Obiukwu-ıfeanyi, N. (2019). Study of corrosion rate of low and medium carbon steel pressure vessel in Nigeria oil and gas industry using ultrasonic testing (UT). Engineering Sciences, 15(3), 151-158.

• Piri, B., Amini, R., Asadinia, E., Vardak, S., Mehdilouee, R., & Mojarrad, A. (2021). Investigation of failure mechanisms and remaining life prediction of firewater pipelines used in industrial applications. Engineering Failure Analysis, 124, Article 105301. https://doi.org/10.1016/j.engfailanal.2021.105301

• Reverdy, F., Benoist, G., & Ber, L. L. (2016). Advantages and complementarity of phased-array technology and total focusing method. 19th World Conference on Non-Destructive Testing 2016, 1-8.

• Schempp, P., Preuß, K., & Tröger, M. (2016). About the correlation between crude oil corrosiveness and results from corrosion monitoring in an oil refinery. Corrosion, 72(6), 843-855. https://doi.org/10.5006/1940

• Shafeek, H., Soltan, H. A., & Abdel-Aziz, M. H. (2021). Corrosion monitoring in pipelines with a computerised system. Alexandria Engineering Journal, 60(6), 5771-5778. https://doi.org/10.1016/j.aej.2021.04.006

• Shekari, E., Khan, F., & Ahmed, S. (2016). A predictive approach to fitness-for-service assessment of pitting corrosion. International Journal of Pressure Vessels and Piping, 137, 13-21. https://doi.org/10.1016/j.ijpvp.2015.04.014

• Shekari, E., Khan, F., & Ahmed, S. (2017). Economic risk analysis of pitting corrosion in process facilities. International Journal of Pressure Vessels and Piping, 157, 51-62. https://doi.org/10.1016/j.ijpvp.2017.08.005

• Singh, D., Banerjee, A., & Das, S. (2017, December 14-16). A comparative study of PAUT and TOFD responses with the changes in microstructure of various materials - A step towards reliable detection [Conference session]. NDE 2017 Conference & Exhibition of the Indian Society for NDT (ISNT), West Bengal, India.

• Siswantoro, N., Priyanta, D., & Ramadhan, J. (2021). Implementation of risk-based inspection (RBI) in condensate separator and storage vessel: A case study. International Journal of Marine Engineering Innovation and Research, 6(1), 1-10. https://doi.org/10.12962/j25481479.v6i1.7565

• Spisák, B., & Szávai, S. (2019, May 23-24). Mechanisms of stress corrosion cracking [Conference session]. MultiScience-XXXIII MicroCAD International Multidisciplinary Scientific Conference, University in Miskolc, Hungary.

• Subramanian, C. (2018). Localised pitting corrosion of API 5L grade A pipe used in industrial fire water piping applications. Engineering Failure Analysis, 92, 405-417. https://doi.org/10.1016/j.engfailanal.2018.06.008

• Tangadi, S., Telidevara, N. K. S. P., & Maddi, H. K. (2015). PAUT as tool for corrosion damage monitoring. Special Issue of e-Journal of Nondestructive Testing, 22(6), 1-7.

• Thorpe, N., Acebes, M., Wylie, D., Troughton, M., Gilmour, O., Roy, O., Benoist, G., & Dweik, R. (2018). Ultrasonic phased array non-destructive testing and in-service inspection system for high integrity polyethylene pipe welds with automated analysis software. Special Issue of e-Journal of Nondestructive Testing (eJNDT), 23(8), 1-9.

• Trimborn, N. (2016). Detecting and quantifying high temperature hydrogen attack (HTHA). Special Issue of e-Journal of Nondestructive Testing (eJNDT), 21(7), 1-4.

• Turcotte, J., Rioux, P., & Lavoie, J. (2016). Comparison corrosion mapping solutions using phased array, conventional UT and 3D scanners. Special Issue of e-Journal of Nondestructive Testing (eJNDT), 21(7) 1-10.

• Turcu, F., Jedamski, T., & Treppmann, DR. D. (2018). In-service corrosion mapping—Challenges for the chemical industry. Special Issue of e-Journal of Nondestructive Testing (eJNDT), 23(8), 1-8.

• Uchida, S., Chimi, Y., Kasahara, S., Hanawa, S., Okada, H., Naitoh, M., Kojima, M., Kikura, H., & Lister, D. H. (2019). Improvement of plant reliability based on combining of prediction and inspection of crack growth due to intergranular stress corrosion cracking. Nuclear Engineering and Design, 341, 112-123. https://doi.org/10.1016/j.nucengdes.2018.10.021

• Vanaei, H. R., Eslami, A., & Egbewande, A. (2017). A review on pipeline corrosion, in-line inspection (ILI), and corrosion growth rate models. International Journal of Pressure Vessels and Piping, 149, 43-54. https://doi.org/10.1016/j.ijpvp.2016.11.007

• Wan, Z., & Yang, J. (2021). Research on corrosion management technology of petroleum pipeline and pressure vessel. IOP Conference Series: Earth and Environmental Science, 692(4), Article 042057. https://doi.org/10.1088/1755-1315/692/4/042057

• Wang, F., Shan, Q., Zhang, F., Lu, F., Li, J., Yu, T., & Qu, C. (2021). Pitting corrosion behavior of metal materials and research methods. IOP Conference Series: Earth and Environmental Science, 651(3), Article 032039. https://doi.org/10.1088/1755-1315/651/3/032039

• Zhang, Z. G., Feng, H. X., & Zhao, W. H. (2016). The NDT methods under high temperature service environment. MATEC Web of Conferences, 40, Article 04001. https://doi.org/10.1051/matecconf/20164004001

• Zheng, J., Zhang, Y., Hou, D., Qin, Y., Guo, W., Zhang, C., & Shi, J. (2018). A review of non-destructive examination technology for polyethylene pipe in nuclear power plant. Frontiers of Mechanical Engineering, 13, 535-545. https://doi.org/10.1007/s11465-018-0515-9