PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY

This work presents a simulation study on the impact of natural ventilation on the thermal performance and thermal comfort of residential buildings of different forms in the hot-dry climate of Amman, the capital of Jordan. Three existing triple-storey residential buildings with different forms, i.e., rectangular, L-shape, and U-shape, are taken as case studies. Models with similar construction and dimensions of the buildings under investigation are designed using the OpenStudio plugin SketchUp software. Two rooms within these buildings have been considered for simulation with the aid of the EnergyPlus simulator for two cases: the basic case with no ventilation and the case with ventilation. The thermal parameters, including the air temperature, relative humidity, air speed, and mean radiant temperature of both rooms, have been extracted from the simulation. The thermal performance of these buildings is analyzed based on the indoor air temperature and mean radiant temperature, while the thermal performance is investigated via the ASHRAE-55 adaptive model. The results show that the rectangular-shaped building has the best thermal performance in unventilated conditions for the middle room on the middle floor (Room 1). In contrast, the U-shape shows better results for the west-northern room on the same floor (Room 2). On the other hand, introducing natural ventilation to the buildings reduces the indoor temperature and, subsequently, enhances the thermal performance where the buildings transform to be within the comfort zone most of the time, according to the ASHRAE-55 adaptive model. Generally, rectangular and U-shaped buildings show comparable thermal performance, while L-shaped buildings have relatively the worst performance.

• Al-Hemiddi, N. A., & Al-Saud, K. A. M. (2001). The effect of a ventilated interior courtyard on the thermal performance of a house in a hot-arid region. Renewable Energy, 24(3-4), 581-595. https://doi.org/10.1016/S0960-1481(01)00045-3

• Ali, H. H., Al Zoubi, H., & Badarneh, S. (2010). Energy efficient design for thermally comforted dwelling units in hot arid zones: Case of vernacular buildings in Jordan. In Conference on Technology & Sustainability in the Built Environment (Vol. 1, p. 279-304). King Saud University - College of Architecture and Planning.

• Almeida, R. M. S. F., Pinto, M., Pinho, P. G., & de Lemos L. T. (2017). Natural ventilation and indoor air quality in educational buildings: Experimental assessment and improvement strategies. Energy Efficiency, 10, 839-854. https://doi.org/10.1007/s12053-016-9485-0

• Almuhtady, A., Alshwawra, A., Al Faouri, M., Al-Kouz, W., & Al-Hinti, I. (2019). Investigation of the trends of electricity demands in Jordan and its susceptibility to the ambient air temperature towards sustainable electricity generation. Energy, Sustainability and Society, 9, 1-18. https://doi.org/10.1186/s13705-019-0224-1

• ASHRAE. (2009). 2009 ASHRAE Handbook: Fundamentals. American Society of Heating, Refrigerating and Air-Conditioning Engineers, Atlanta, USA. https://www.worldcat.org/title/2009-ASHRAE-handbook-:-fundamentals/oclc/525070649

• ASHRAE. (2017). Thermal Environmental Conditions for Human Occupancy. American Society of Heating Ventilating and Air-conditioning Engineers, Atlanta, USA. https://www.ashrae.org/file%20library/technical%20resources/standards%20and%20guidelines/standards%20addenda/55_2017_d_20200731.pdf

• ASHRAE. (2020). Standard 55-2020-Thermal Environmental Conditions for Human Occupancy (ANSI Approved). American Society of Heating Ventilating and Air-conditioning Engineers, Atlanta, USA. https://www.techstreet.com/ashrae/standards/ashrae-55-2020?product_id=2207271#amendments

• Bekkouche, S. M. A., Benouaz, T., Cherier, M.K., & Hamdani, M. (2013). Influence of the compactness index to increase the internal temperature of a building in Saharan climate. Energy Building, 66, 678-687. http://dx.doi.org/10.1016/j.enbuild.2013.07.077

• Betti, G., Tartarini, F., Schiavon, S., & Nguyen, C. (2021). CBE Clima Tool. Version 0.4.6. Center for the Built Environment, University of California Berkeley. https://clima.cbe.berkeley.edu

• Bienvenido-Huertas, D., Sánchez-García, D., Rubio-Bellido, C., & Solís-Guzmán, J. (2022). Using adaptive strategies of natural ventilation with tolerances applied to the upper limit to improve social dwellings’ thermal comfort in current and future scenarios. Science and Technology for the Built Environment, 28, 527-546. https://doi.org/10.1080/23744731.2022.2040884

• Chen, H., Du, R., Ren, W., Zhang, S., Du, P., & Zhang, Y. (2021). The microbial activity in PM2.5 in indoor air: As an index of air quality level. Aerosol and Air Quality Research, 21, Article 200101. https://doi.org/10.4209/aaqr.2020.03.0101

• Deng, X., Wang, M., Sun, D., & Fan, Z. (2020). Effect of building form on energy consumption of academic library buildings in different climate zones in China. IOP Conference Series: Earth and Environmental Science, 531(1), Article 012060. https://dx.doi.org/10.1088/1755-1315/531/1/012060

• Elnagar, E., & Köhler, B. (2020). Reduction of the energy demand with passive approaches in multifamily nearly zero-energy buildings under different climate conditions. Frontiers in Energy Research, 8, Article 545272. https://doi.org/10.3389/fenrg.2020.545272

• González, V. G., Ruiz G. R., & Bandera, C. F. (2020). Empirical and comparative validation for a building energy model calibration methodology, Sensors, 20, Article 5003. https://doi.org/10.3390/s20175003

• Heracleous, C., & Michael, A. (2018). Assessment of overheating risk and the impact of natural ventilation in educational buildings of Southern Europe under current and future climatic conditions. Energy, 165, 1228-1239. https://doi.org/10.1016/j.energy.2018.10.051

• Hughes, B. R., Calautit, J. K., & Ghani, S. A. (2012). The development of commercial wind towers for natural ventilation: A review. Applied Energy, 92, 606-627. https://doi.org/10.1016/j.apenergy.2011.11.066

• Kim, A., Wang, S., & Kim, J. (2019). Dorothy reed, indoor/outdoor environmental parameters and window-opening behavior: A structural equation modeling analysis. Buildings, 9(4), Article 94. https://doi.org/10.3390/buildings9040094

• Kocagil, I. E., & Oral, G. K. (2015). The effect of building form and settlement texture on energy efficiency for hot dry climate zone in Turkey. Energy Procedia, 78(4), 1835-1840. https://doi.org/10.1016/j.egypro.2015.11.325

• Krarti, M. (2018). Integrated Design and Retrofit of Buildings. Optimal Design and Retrofit of Energy Efficient Buildings. Communities, and Urban Centers. Elsevier. https://doi.org/10.1016/C2016-0-02074-0

• Kumar, S., Singh, M. K., Mathur, A., Mathur, S., & Mathur, J. (2018). Thermal performance and comfort potential estimation in low-rise high thermal mass naturally ventilated office buildings in India: An experimental study. Journal of Building Engineering, 20, 569-584. https://doi.org/10.1016/j.jobe.2018.09.003

• Lapisa, R. (2019). The effect of building geometric shape and orientation on its energy performance in various climate regions. International Journal of GEOMATE, 16(63), 113-119. http://dx.doi.org/10.21660/2019.53.94984

• Ma’bdeh, S. N., Al-Zghoul, A., Alradaideh, T., Bataineh, A., & Ahmad, S. (2020). Simulation study for natural ventilation retrofitting techniques in educational classrooms - A case study. Heliyon, 6(10), Article e0517. https://doi.org/10.1016/j.heliyon.2020.e05171

• Mastouri, H., Radoine, H., Bahi, H., Benhamou, B., & Hamdi, H. (2019). Effect of natural ventilation on the thermal performance of a residential building in a hot semi-arid climate. In 2019 7th International Renewable and Sustainable Energy Conference (IRSEC) (p. 1-6). IEEE Publishing. http://dx.doi.org/10.1109/IRSEC48032.2019.9078215

• Mohsenzadeh, M., Marzbali, M. H., Tilaki, M. J. M., & Abdullah, A. (2021). Building form and energy efficiency in tropical climates: A case study of Penang, Malaysia. urbe Revista Brasileira de Gestão Urbana, 13, Article e20200280. https://doi.org/10.1590/2175-3369.013.e20200280

• Muhaisen, A. S., & Abed, H. M. (2015). Effect of building proportions on the thermal performance in the mediterranean climate of the Gaza strip. Journal of Engineering Research and Technology, 2(2), 112-121.

• Mushtaha, E., & Helmy, O. (2017). Impact of building forms on thermal performance and thermal comfort conditions in religious buildings in hot climates: A case study in Sharjah City. International Journal of Sustainable Energy, 36(10), 1-19. https://doi.org/10.1080/14786451.2015.1127234

• Muslim, S. A. (2021). EnergyPlus - Towards the selection of right simulation tool for building energy and power systems research. Journal of Energy and Power Technology, 3(3), Article 2103034. http://dx.doi.org/10.21926/jept.2103034

• Nagy, R., Mečiarová, Ľ., Vilčeková, S., Burdová, E. K., & Košičanová, D. (2019). Investigation of a ventilation system for energy efficiency and indoor environmental quality in a renovated historical building: A case study. International Journal of Environmental Research and Public Health, 16(21), Article 4133. https://doi.org/10.3390/ijerph16214133

• Nazer, H. A. (2019). Developing an energy benchmark for residential apartments in Amman. Jordan Green Building Council. https://library.fes.de/pdf-files/bueros/amman/15926.pdf

• Omrani, S., Garcia-Hansen, V., Capra, B. R., & Drogemuller, R. (2017). Effect of natural ventilation mode on thermal comfort and ventilation performance: Full-scale measurement. Energy and Buildings, 156, 1-16.

• Ozarisoy, B. (2022). Energy effectiveness of passive cooling design strategies to reduce the impact of long-term heatwaves on occupants’ thermal comfort in Europe: Climate change and mitigation. Journal of Cleaner Production, 330, Article 129675. https://doi.org/10.1016/j.jclepro.2021.129675

• Raji, B., Tenpierik, M. J., Bokel, R., & Dobbelsteen, A. V. D. (2020). Natural summer ventilation strategies for energy-saving in high-rise buildings: A case study in the Netherlands. International Journal of Ventilation, 19(1), 25-48. https://doi.org/10.1080/14733315.2018.1524210

• Raof, B. Y. (2017). The correlation between building shape and building energy performance. International Journal of Advanced Research (IJAR), 5(5), 552-561. http://dx.doi.org/10.21474/IJAR01/4145

• Rodrigues, A. M., Santos, M., Gomes, M.G., & Duarte, R. (2019). Impact of natural ventilation on the thermal and energy performance of buildings in a Mediterranean climate. Buildings, 9(3), 1-17. https://doi.org/10.3390/buildings9050123

• Saif, J., Wright, A., Khattak, S., & Elfadli, K. (2021) Keeping cool in the desert: Using wind catchers for improved thermal comfort and indoor air quality at half the energy. Buildings, 11(3), Article 100. https://doi.org/10.3390/buildings11030100

• Yang, L., Liu, X., Qian, F., & Du, S. (2019). Ventilation effect on different position of classrooms in “line” type teaching building. Journal of Cleaner Production, 209, 886-902. https://doi.org/10.1016/j.jclepro.2018.10.228

• Yu, C. R., Guo, H. S., Wang, Q. C., & Chang, R. D. (2020). Revealing the impacts of passive cooling techniques on building energy performance: A residential case in Hong Kong. Applied Sciences, 10(12), Article 4188. https://doi.org/10.3390/app10124188

• Yu, J., Ye, H., Xu, X., Huang, J., Liu, Y., & Wang, J. (2018). Experimental study on the thermal performance of a hollow block ventilation wall. Renewable Energy, 122, 619-631. https://doi.org/10.1016/j.renene.2018.01.126