PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY

Tapping into solar renewable energy can accelerate Malaysia’s energy economy, and one of the ways to achieve this is through solar pavement technology. Solar pavement technology is an emerging field, and Malaysia, through its green policies, welcomes such innovations to promote environmental sustainability. This research investigates the use of conductive pipes for thermal energy harvesting in solar pavement collectors. Design software, Solidworks 2020, and simulation software, Ansys Fluent 19.2, were utilised to optimise the design parameters of the solar pavement collector. These parameters included the pipe materials (copper, stainless steel, and aluminium), pipe depths (30, 40, 50, 60, 70, and 80mm), and pipe spacing (70, 80, 100, 130, and 150mm). Results show that a serpentine configuration with copper piping exhibited the highest heat efficiency, producing an outlet temperature of 54.21°C at a pipe depth of 50 mm and a centre-to-centre spacing of 80 mm. Additionally, the water flow rate of the optimised pipe design reached an acceptable value of 1.562 m/s. Stainless steel, arranged in a serpentine pattern, achieved a maximum temperature of 54.92 ºC, 1.3% higher than copper in the same configuration. However, aluminium in a serpentine pattern showed a 2.9% decrease compared to stainless steel. The generated warm water has potential for household use, reducing reliance on conventional electricity and contributing to a reduction in carbon footprint, given Malaysia's heavy reliance on fossil fuels for electricity generation.

• Adenan, M. S., Prajadhiana, K. P., Mat, M. F., Manurung, Y. H. P., Ishak, D. P., Adesta, E. T., Colditz, P., Dizon, J. R. C., Mohamed, M. A., & Jamaludin, M. F. (2023). Chained simulation of the welding-forming process in analysing press force and geometrical deformation using non-linear numerical computation with experimental validation. The International Journal of Advanced Manufacturing Technology, 125(9–10), 4631–4646. https://doi.org/10.1007/s00170-023-11069-x
  
  Ahmad, M., Itam, Z. B., Beddu, S., Alanimi, F. B. I., & Soanathan, S. A. P. (2018). A determination of solar heat collection in sepertine copper and rubber pipe embedded in asphalt pavement using finite element method. Journal of Engineering and Applied Sciences, 13(1), 181–189. https://doi.org/10.3923/jeasci.2018.181.189
  
  Bobes-Jesus, V., Pascual-Muñoz, P., Castro-Fresno, D., & Rodriguez-Hernandez, J. (2013). Asphalt solar collectors: A literature review. Applied Energy, 102, 962–970. https://doi.org/10.1016/j.apenergy.2012.08.050
  
  Johnsson, J., & Adl-Zarrabi, B. (2020). A numerical and experimental study of a pavement solar collector for the northern hemisphere. Applied Energy, 260, Article 114286. https://doi.org/10.1016/j.apenergy.2019.114286
  
  Michael Smith Engineers. (2024). Useful information on pipe velocity. https://www.michael-smith-engineers.co.uk/resources/useful-info/pipe-velocity
  
  Pietzonka, P., & Seifert, U. (2018). Universal trade-off between power, efficiency, and constancy in steady-state heat engines. Physical Review Letters, 120(19), Article 190602. https://doi.org/10.1103/PhysRevLett.120.190602
  
  Santos-Ruiz, I., López-Estrada, F. R., Puig, V., & Valencia-Palomo, G. (2020). Simultaneous optimal estimation of roughness and minor loss coefficients in a pipeline. Mathematical and Computational Applications, 25(3), Article 56. https://doi.org/10.3390/mca25030056
  
  Sheikholeslami, M. (2023). Numerical investigation for concentrated photovoltaic solar system in existence of paraffin equipped with MWCNT nanoparticles. Sustainable Cities and Society, 99, Article 104901. https://doi.org/10.1016/j.scs.2023.104901
  
  Sheikholeslami, M., & Khalili, Z. (2024a). Energy management of a concentrated photovoltaic−thermal unit utilizing nanofluid jet impingement in existence of thermoelectric module. Engineering Applications of Computational Fluid Mechanics, 18(1), Article 2297044. https://doi.org/10.1080/19942060.2023.2297044
  
  Sheikholeslami, M., & Khalili, Z. (2024b). Environmental and energy analysis for photovoltaic-thermoelectric solar unit in existence of nanofluid cooling reporting CO2 emission reduction. Journal of the Taiwan Institute of Chemical Engineers, 156, Article 105341. https://doi.org/10.1016/j.jtice.2023.105341
  
  Talib, S. H. A., Hashim, S. I. N. S., Beddu, S., Maidin, A. F., & Abustan, M. S. (2017). Heat lump in different pavement layer using ethylene glycol as a solar heat collector. In MATEC Web of Conferences (Vol. 87, p. 01015). EDP Sciences. https://doi.org/10.1051/matecconf/20178701015
  
  Vizzari, D., Gennesseaux, E., Lavaud, S., Bouron, S., & Chailleux, E. (2021). Pavement energy harvesting technologies: A critical review. RILEM Technical Letters, 6, 93–104. https://doi.org/10.21809/rilemtechlett.2021.131
  
  Xu, Q., Wang, K., Zou, Z., Zhong, L., Akkurt, N., Feng, J., Xiong, Y., Han, J., Wang, J., & Du, Y. (2021). A new type of two-supply, one-return, triple pipe-structured heat loss model based on a low temperature district heating system. Energy, 218, Article 119569. https://doi.org/10.1016/j.energy.2020.119569
  
  Zaim, E. H., Farzan, H., & Ameri, M. (2020). Assessment of pipe configurations on heat dynamics and performance of pavement solar collectors: An experimental and numerical study. Sustainable Energy Technologies and Assessments, 37, Article 100635. https://doi.org/10.1016/j.seta.2020.100635